Home > all products list >

GoPro 3D Multi-Purpose Underwater Housing Hero3, Hero3+ Hero4 (not Hero2) - Special Order

GoPro 3D  underwater Multi-Purpose Housing for GoPro Hero3 Hero3+


 
Alternative Views:


Our Price: $199.00

Quantity in Stock:(Out of Stock)
Availability:: This is a special order item. May not be in stock at time of ordering
Product Code: E3DH-3
Qty:

Description
 

We have modified the Hero2 housing to work with TWO Hero3 or Hero3+ 4 cameras.

PLEASE NOTE THAT THE HERO2 SYNC CABLE DOES NOT WORK WITH HERO3 CAMERAS (not included).
SO THIS HOUSING WOULD HAVE TO BE USED WITH THE WI-FI REMOTE CONTROLLING BOTH CAMERAS.


The Wi-Fi remote solution is not necessarily frame accurate, but pretty close. If you want to use GoPro Cineform you'll have to do some tweaking. See section below. It's pretty easy to alight two videos by using their audio waveforms in many other editing programs. Easiest way is to simply clap your hands once at the beginning of each take and the two waveforms can be quickly aligned up.

The two buttons work for the right side, upright camera, but not for the upside down camera.

Wi-Fi does not work underwater. But you can take it underwater by turning the cameras on before submerging. We have pressure tested this flat lens housing to 200 feet.

We also call this a multi-purpose housing because you could also use this housing in another creative way. One camera could shoot time-lapse (quick stills), while the other camera shoots video AT THE SAME TIME. Or you could shoot one camera at 720 slow-mo and the other at 1080 or both can shoot video at different angles of view. Lots of creative choices. And still control both cameras with one WiFi remote.

The lenses don't match up exactly on the horizontal plane in this housing (see picture above). One is higher, the other is lower so don't use this for any kind of critical 3D work. It's about 1/16" offset.

The GoPro battery bacpac WILL work in this housing. That will double your battery life. LCD screen will not work. Camera functions/records as it normally would without the cable. Note there is no way to control the camera remotely with this housing.


Check out our 3D Hard case for storing this 3D housing.

----------------------------
HOW TO USE GOPRO CINEFORMSTUDIO without using a sync cable. This program does not show audio waveforms so you'll have to use a visual cue to sync:
You may get lucky and have the two cameras in perfect sync when using the Wi-Fi remote. To open non-synced files in Cineform, do the following file/folder renaming:

Left Folder Name: 100G_3D_L
Right Folder Name: 100G_3D_R

Left Video Name: 3D_L0001
Right Video Name: 3D_R0001

Import the left file into CineformStudio.
It will auto pair them when you import into the software. If they are not in perfect sync, then do the following in the left column:
Right click on the imported pair and choose "Separate 3D pair". This will allow you to manually adjust the start, end of each Left/Right
file. Note when you are done the total frames needs to be the same. Also note that CineformStudio does NOT show audio waveforms so
you'll have to rely on visual cues for sync.

Once you are done adjusting, highlight both files in the left side and choose "Find Pair". Then click AutoPair. Proceed as you normally would do in CineformStudio.