Home > all products list >

HDMI 5.8Ghz Wireless Transmitter / Receiver Kit 500 Foot Range
HDMI Wireless Transmitter / Receiver Kit 500 Foot Range


 
Alternative Views:


Our Price: $450.00
Sale Price: $399.00
Savings: $51.00

Product Code: EHDMIWT
Qty:

Description
 
We are excited to announce a new product that fills the gap between the inexpensive 80 foot range HDMI kits and the $4k professional systems with longer range.

Here it is. 5.8ghz uncompressed 1080p up to 500 feet line-of-sight with stock antennas (cloverleaf antennas don't appear to make a difference). Could go farther with specialized long range antennas. Obviously buildings, fences, electronics would affect the range. We will be testing on moving vehicles to see how the kit does.

Here's proof of the 500 foot range:


Please note that any kind of obstruction such as fences, walls, electronics can drastically reduce the range. Each environment is different. Test before using at an important event.

This system uses MIMO (multiple in, multiple out) technology which basically in this case uses three antennas transmitting parallel signals and receiver chooses the clearest signal at any given moment. This gives you better range, less dropouts.

And this kit has VIRTUALLY NO DELAY or latency. The output signal quality looks identical to the input signal.

The transmitter / receiver is rather large - 6"L x 6.5"W x 1.75"H. But very light - only 13oz with antennas. What's nice about these units is they both have a USB port on the back for power which makes it really easy to run these from USB batteries. There is room inside to put in a USB powerpack. Requires 1.2 AMPS.

Both transmitter and receiver have ONLY one full-sized HDMI plug each.

For GoPro Hero2, you would need an HDMI Mini adapter.
For GoPro Hero3, 3+, 4, you would need an HDMI Micro adapter.
Would work with any camera/device that has HDMI signal out.

Dimensions (transmitter and receiver are identical):
6"L x 6.5"W x 1.75"H
weight: 13oz with 3 antennas
Kit comes with two 5v USB AC power supplies
Support for HDMI 1.3 and HDCP 1.2
Secure 128 Bit AES encryption
Operates on 5.180 ~ 5.825 GHz in OFDM modulation technology
20 - 30 ms system latency
NTSC / PAL

supported resolutions:
640 x 480 at 85 fps
800 x 600 at 85 fps
1024 x 768 at 75 fps
1280 x 1024 at 30/25 fps
1600 x 1200 at 30/25 fps
1440 x 900 at 30/25 fps
1680 x 1050 at 30/25 fps
1920 x 1080 at 30/25 fps

Power Consumption Transmitter: 1200 mA at 5V
Receiver: 1200 mA at 5V

Operating Temperature 32 - 104° F (0 - 40° C) Note this could be an issue in some circumstances.

Kit contains:
IR Blaster
HDMI Cable
2 x Power Adapter
6 x Antenna
User's Manual
2-Year Limited Warranty
NOTE: You need to buy a connecting cable to connect your male MICRO HDMI plug to a female normal HDMI plug. it's NOT included.

==========================================